has been added to your cart
View Cart

Round Downpipe

Stratco

SKU: Round-Downpipe

The classic Stratco Round Downpipe is available in a diameter to suit any application from industrial to residential buildings. Spouting lengths of 1800mm and 2400mm are available in galvanised, zinc/al or a huge range of roofing colours. Whether you want to install it yourself or require assistance, we are here to help. Contact us for pricing and further details today.

Classic Round Downpipe

Downpipe styling designed to adapt to any architecture

Round downpipes have a timeless shape that compliments both modern and traditional architecture. The round profile is largely self cleaning and is available in a huge range of diameters. Complete your project with an extensive range of Stratco Round Downpipe accessories.

Available Colours:

Round Downpipe Accessories

Downpipe straps can be supplied to easily attach the downpipe to the wall of the building. Shoes (135°) and elbows (90°) are available to help water flow to a specific area. Downpipe outlets are an added accessory to help channel water from the gutter to the downpipe.

Note: Component availability is state specific, please check prior to ordering.

Downpipes Downpipe Spouts Spouting Round Accessory 01

Adjustable Two Piece Offset

Downpipes Downpipe Spouts Spouting Round Accessory 02

Downpipe Elbow

Downpipes Downpipe Spouts Spouting Round Accessory 03

Downpipe Shoe

Downpipes Downpipe Spouts Spouting Round Accessory 04

45° and 90° Crimped Bend

Downpipes Downpipe Spouts Spouting Round Accessory 06

17° Cast PVC Offset

Downpipes Downpipe Spouts Spouting Round Accessory 07

45° Cast PVC Offset

Downpipes Downpipe Spouts Spouting Round Accessory 05

90° Cast PVC Offset

Downpipes Downpipe Spouts Spouting Round Accessory 08

Metal Sculptured Outlet

Downpipes Downpipe Spouts Spouting Round Accessory 09

Downpipe Outlet

Downpipes Downpipe Spouts Spouting Round Accessory 10

Downpipe Strap

Downpipes Downpipe Spouts Spouting Round Accessory 11

Pipelock Bracket

Downpipes Downpipe Spouts Spouting Round Accessory 12

Adjustable Tee Bracket

As a general guide, in non cyclonic areas, for every 1m2 of roof area drained, 70mm2 of downpipe is required. This calculation is based on the assumption that the maximum rainfall does not exceed 125mm per hour.

It is considered the best practice to drain to different points, using smaller downpipes rather than to one large outlet. Where possible, downpipes should be spaced at not more than 12000mm centres.

For a more accurate guide, consult the Installation Code for Metal Roofing and Wall Cladding SAA HB39-1997.

Material Specification

BMT - 0.40mm and 0.50mm
Tensile - G300 MPa

Downpipes Downpipe Spouts Spouting Round Profile

Downpipe Sizes
Diameter (mm) Roof Area Drained (m²)
50 30
65 45
75 65
90 90
100 115
125 170
150 250
175* 345
200* 450
225* 570

*1800mm lengths only

Change Location

Please enter a valid postcode